This part fits vehicles with your year, make and model. Please click the Fitment tab below and confirm your engine, chassis and transmission.

Shopping for a different vehicle? To make sure this part fit your vehicle Check The Fit

To make sure this part fit your vehicle Check The Fit

Attention! This part may not fit your vehicle!
To make sure this part does fit your vehicle Check The Fit

Transfer Case Motor - Cardone Reman - Transfer Case Motor (Part Number: 48-214)

  • Price:

  • Availability: ...

Check The Fit

  • CTO: MX
  • Emission Code: 1
  • Canadian Harmonizing Tariff Code: 8501310090
  • Harmonized Tariff Code (Schedule B): 8501106060
  • Harmonized Tariff Code (HTS): 8501106060
  • Life Cycle Status Code: 2
  • Life Cycle Status Description: Available to Order
  • SDR Required Flag: N
  • Maximum Cases per Pallet Layer: 71
  • Pallet Layer Maximum: 3
  • Remanufactured Part: Y
  • Warranty Distance: 18000
  • Warranty Distance UOM: MI
  • Warranty Special UOM: TX
  • Warranty Time: 12
  • Warranty Time UOM: MO
  • Application Summary: Ford F-150 1999, F-250 1999, Lobo 1999
  • AAIA Part Type Description: Transfer Case Motor
  • Product Description - Invoice: Reman. Transfer Case Motor
  • Key Search Words: Transfer Case Motor, Transfer Case, TCM
  • Label Description: Remanufactured Transfer Case Motor
  • Marketing Description: CARDONE Remanufactured Transfer Case Motors are designed to meet or exceed O.E. performance. Reverse engineering provides insight into how and why the unit originally failed, allowing our engineers to identify and correct original design weaknesses. Each unit is 100% computer tested at three points during the remanufacturing process to ensure reliability. CARDONE is committed to getting your vehicle back to peak performance with our direct-replacement transfer case motors.
  • Short Product Description: Transfer Case Mtr
  • Component Housing Material: Steel
  • Connector/Terminal Configuration: Pin
  • E-Waste: Yes
  • FAQs: Do not operate motor off the Transfer Case or you will damage the motor and set an error code that must be cleared before the motor will operate. Shift the Transfer Case into the position of the motor to install.
  • FAQs: What drivetrain position is the replacement motor drive placed in?
  • FAQs: Can I install the replacement motor if my Tranfer Case motor failed in 4 Wheel Drive low or high?
  • FAQs: The replacement motor drive is factory-set in the 2 wheel drive position.
  • FAQs: The replacement motor drive is in a different position, can I reposition before installing?
  • FAQs: A crescent wrench can be used for this operation.
  • FAQs: The Service 4WD light is on and/or the 4WD is inoperative. What could cause this condition?
  • FAQs: This may be caused by a transfer case control module calibration issue. Check for DTC's and calibration version - there may be a software update from the Original Equipment Manufacturer. If the motor attempts to shift, but sounds weak, check the front axle lock actuator. If the axle lock does not engage, the motor cannot complete its engagement.
  • FAQs: The transfer case must be manually shifted into the 2 wheel drive position before the installation of the replacement motor.
  • FAQs: What tool can I use to manually shift the transfer case into the two-wheel drive position before I install the replacement motor?
  • Package Contents: Transfer Case Motor Instruction Sheet
  • Product Condition: Remanufactured
  • Product Line Marketing Stmt: After 50 years of leadership in the automotive aftermarket, we are excited to start the next chapter of CARDONE's dynamic history. We are positioned to support the next wave of vehicle technology and ready to innovate new solutions that bring value to our customers - all while upholding sustainable business practices and high ethical principles. We build it better.

Product Details

Manufacturer:
Cardone Reman
Part Number:
48-214
Manufacturer Part Number:
48-214
Description:
Transfer Case Motor
Long Description:
Transfer Case Motor
Part Type:
Transfer Case Motor
Category:
Transfer Case
Subcategory:
Motors
Sales Rank:

Technical Details

Core Price:
...
Condition:
Remanufactured
Product Fit:
Direct Fit
Weight:
3 lbs.
Height:
9.5"
Width:
4.625"
Length:
4.625"
UOM:
EA
Quantity Sold:
Sold individually
Qty Per Application:
1
Minimum Order Qty:
1
Item GTIN:
082617665797
Item Location:
Phoenix, AZ

Specifications

CTO
MX
Emission Code
1
Canadian Harmonizing Tariff Code
8501310090
Harmonized Tariff Code (Schedule B)
8501106060
Harmonized Tariff Code (HTS)
8501106060
Life Cycle Status Code
2
Life Cycle Status Description
Available to Order
SDR Required Flag
N
Maximum Cases per Pallet Layer
71
Pallet Layer Maximum
3
Remanufactured Part
Y
Warranty Distance
18000
Warranty Distance UOM
MI
Warranty Special UOM
TX
Warranty Time
12
Warranty Time UOM
MO
Application Summary
Ford F-150 1999, F-250 1999, Lobo 1999
AAIA Part Type Description
Transfer Case Motor
Product Description - Invoice
Reman. Transfer Case Motor
Key Search Words
Transfer Case Motor, Transfer Case, TCM
Label Description
Remanufactured Transfer Case Motor
Marketing Description
CARDONE Remanufactured Transfer Case Motors are designed to meet or exceed O.E. performance. Reverse engineering provides insight into how and why the unit originally failed, allowing our engineers to identify and correct original design weaknesses. Each unit is 100% computer tested at three points during the remanufacturing process to ensure reliability. CARDONE is committed to getting your vehicle back to peak performance with our direct-replacement transfer case motors.
Short Product Description
Transfer Case Mtr
Component Housing Material
Steel
Connector/Terminal Configuration
Pin
E-Waste
Yes
FAQs
Do not operate motor off the Transfer Case or you will damage the motor and set an error code that must be cleared before the motor will operate. Shift the Transfer Case into the position of the motor to install.
FAQs
What drivetrain position is the replacement motor drive placed in?
FAQs
Can I install the replacement motor if my Tranfer Case motor failed in 4 Wheel Drive low or high?
FAQs
The replacement motor drive is factory-set in the 2 wheel drive position.
FAQs
The replacement motor drive is in a different position, can I reposition before installing?
FAQs
A crescent wrench can be used for this operation.
FAQs
The Service 4WD light is on and/or the 4WD is inoperative. What could cause this condition?
FAQs
This may be caused by a transfer case control module calibration issue. Check for DTC's and calibration version - there may be a software update from the Original Equipment Manufacturer. If the motor attempts to shift, but sounds weak, check the front axle lock actuator. If the axle lock does not engage, the motor cannot complete its engagement.
FAQs
The transfer case must be manually shifted into the 2 wheel drive position before the installation of the replacement motor.
FAQs
What tool can I use to manually shift the transfer case into the two-wheel drive position before I install the replacement motor?
Package Contents
Transfer Case Motor Instruction Sheet
Product Condition
Remanufactured
Product Line Marketing Stmt
After 50 years of leadership in the automotive aftermarket, we are excited to start the next chapter of CARDONE's dynamic history. We are positioned to support the next wave of vehicle technology and ready to innovate new solutions that bring value to our customers - all while upholding sustainable business practices and high ethical principles. We build it better.

The CARDONE REMAN Transfer Case Motor contains no remanufactured components, and is designed to operate in either city or highway driving.

Year Make Model Engine Notes
1999FordF-1504.2L[Transfer Case Motor] 4WD; Quantity needed per vehicle: 1
1999FordF-1504.6L[Transfer Case Motor] 4WD; Quantity needed per vehicle: 1
1999FordF-1504.6L[Transfer Case Motor] 4WD; Quantity needed per vehicle: 1
1999FordF-1505.4L[Transfer Case Motor] 4WD; Quantity needed per vehicle: 1
1999FordF-1505.4L[Transfer Case Motor] 4WD; Quantity needed per vehicle: 1
1999FordF-2504.6L[Transfer Case Motor] 4WD; Quantity needed per vehicle: 1
1999FordF-2504.6L[Transfer Case Motor] 4WD; Quantity needed per vehicle: 1
1999FordF-2505.4L[Transfer Case Motor] 4WD; Quantity needed per vehicle: 1
1999FordF-2505.4L[Transfer Case Motor] 4WD; Quantity needed per vehicle: 1
1999FordF-2505.4L[Transfer Case Motor] 4WD; Quantity needed per vehicle: 1
1999FordLobo4.6L[Transfer Case Motor] 4WD; Quantity needed per vehicle: 1
1999FordLobo5.4L[Transfer Case Motor] 4WD; Quantity needed per vehicle: 1

Warranty Information

New products purchased from our store are covered by a manufacturer warranty. Other than applicable manufacturer warranties, or as otherwise provided in these Terms & Conditions, there are no warranties, express or implied for any of our products, and we specifically disclaim any warranty of merchantability or fitness for a particular purpose for tires, aftermarket wheels, and tire & aftermarket wheel packages.

For other parts, we provide a limited warranty of 90 days from the date received by the original purchaser or installer, unless otherwise specified, which covers the replacement of a defective part(s). The warranty applies only to parts replacement with same or better quality. For such cases, a full refund will be issued to the original purchaser. A refund or an exchange of a defective part will be processed only if it is accompanied by the original sales invoice. All items must be in their original condition and must not be damaged due to incorrect installation upon return. The warranty is limited only to the original purchaser and is non-transferable.

All items are given a limited 90-days warranty period by the manufacturer. The manufacturer will allow the parts to be covered by their warranty provided that the part was not modified by the buyer.

Under NO circumstances will our liability exceed the amount of the original sale.

Products damaged as a result of abuse, misuse, improper repairs or maintenance, improper installation, alteration, or modification will not be covered by the warranty.

The warranty does not cover airfreight charges, labor expenses, towing expenses, or rental car expenses resulting from installation errors. Return shipping is the responsibility of the buyer. We will not reimburse any return shipping charges incurred.

All returned items must have the RA (Return Authorization) number written outside the shipping box prior to return. The RA Numbers can be obtained by creating a return from within your account. Returned items without RA numbers will not be accepted.

Our liability does not cover lost or stolen packages mailed back by the customer containing the parts being claimed under warranty. Because the customer is the shipper, he/she is the only one who can file any lost claim with the shipping company. Therefore, the claim must be coordinated and processed through the shipping company by the customer.



Can't find what you are looking for? Try searching by one of these methods below.