Attention! This part may not fit your vehicle!
To make sure this part does fit your vehicle Check The Fit
To make sure this part does fit your vehicle Check The Fit
Fuel Injection Throttle Body - Cardone New - Fuel Injection Throttle Body (Part Number: 6E-8016)
- CTO: CN
- Emission Code: 1
- Canadian Harmonizing Tariff Code: 8481800081
- Harmonized Tariff Code (Schedule B): 8481809020
- Harmonized Tariff Code (HTS): 8481809020
- Life Cycle Status Code: 2
- Life Cycle Status Description: Available to Order
- SDR Required Flag: N
- Maximum Cases per Pallet Layer: 35
- Pallet Layer Maximum: 7
- Remanufactured Part: N
- Warranty Distance UOM: MI
- Warranty Special: Limited Lifetime
- Warranty Special UOM: TX
- Warranty Time UOM: MO
- Application Summary: Toyota 4Runner 2010, Tacoma 2016-05
- AAIA Part Type Description: Fuel Injection Throttle Body
- Product Description - Invoice: New Fuel Injection Throttle Body
- Key Search Words: Throttle Body, Throttle, Fuel Injection Throttle Body, Intake, Air Intake, Throttle Valve, Carburetor, Manifold, TBI, ETB, Electronic Throttle Body, Mechanical Throttle Body, Throttle Bore, Throttle Blade
- Label Description: New Fuel Injection Throttle Body
- Marketing Description: All CARDONE 100% New Electronic Throttle Bodies are guaranteed to fit and function like the original due to our proprietary engineering standards. Each unit is built and tested as a complete assembly to ensure quick installation and reliable performance. All components match O.E., ensuring accurate air flow in all driving conditions and peak engine performance.
- Short Product Description: Throttle Body
- Bore Diameter: 60 MM
- E-Waste: Yes
- FAQs: A relearn calibration procedure is necessary after installation of replacement throttle body.
- FAQs: Are your new throttle bodies the same design as OE?
- FAQs: Can I purchase a throttle body with a bigger bore to increase horsepower and improve my throttle response?
- FAQs: Not all throttle bodies have this feature where the throttle valve is reversed from its normal movement by the controlling module to break up any ice formation between the throttle bore and valve. This feature is based on application.
- FAQs: What else does the throttle body control other than idle air bypass and acceleration throughout driving range?
- FAQs: What's an Electronic Throttle body?
- FAQs: The most common failure in an Electronic Throttle Body is the integrated Throttle Position Sensor. The ETB is equipped with high and Low voltage reference Throttle Position Sensor for redundancy. Either one of these sensors could fail or possibly both.
- FAQs: The throttle body is also utilized as part of the cruise control, traction control, stability control, and pre-crash systems, as well as other systems that require engine torque management.
- FAQs: Do all throttle bodies have an ice breaker mode for extreme cold starts?
- FAQs: Do you sell throttle body spacers?
- FAQs: Is there anything that has to be done after installing the replacement throttle body?
- FAQs: No, bypassing of coolant hoses is not recommended. There are cases where we sell units without coolant pipes, because we are following OE supersessions where the pipes have been removed and instructions are provided for rerouting coolant hoses.
- FAQs: What causes the Electronic Throttle Body to fail?
- FAQs: What happens when an Electronic Throttle Body fails?
- FAQs: Is it ok to bypass the coolant hoses?
- FAQs: Swapping your throttle body for one with a bigger bore is not recommended. The throttle bodies we sell are specific to the application.
- FAQs: The OE throttle body has coolant hoses attached. What's the purpose?
- FAQs: The purpose of the attached coolant hoses is to keep the throttle body warm by the transfer of heat from the coolant to the housing preventing moisture from freezing between the throttle body bore and throttle valve during extreme cold temperatures.
- FAQs: We do not sell Throttle Body spacers nor do we recommend the use of a spacer.
- FAQs: When installing the new Electronic Throttle Body there is no need to modify the vehicle for installation.
- FAQs: Will I have to modify anything on the vehicle to install your new throttle body?
- FAQs: When an Electronic Throttle Body fails, the controlling module will illuminate the MIL/SES/CEL, the module will then activate a fail-safe mode operation and gradually reduce the engine's speed back to an idle rpm.
- FAQs: The electronic throttle body is a powertrain component that has a plate, motor, and integrated position sensors which are utilized to regulate the amount of air entering the engine by opening the throttle valve to a desired angle via commands from the vehicles Powertrain Control Module or Throttle Actuator Control Module.
- FAQs: The new Electronic Throttle Body is designed and manufactured to meet OE Manufacturer standards.
- Housing Color/Finish: Gray/Finished
- Housing Material: Aluminum
- Idle Air Control Motor Included: No
- Inlet Diameter (mm): 70
- Inlet Type: Round
- Original Equipment Replacement: Yes
- Outlet Diameter (mm): 61
- Outlet Type: Round
- Package Contents: Electronic Throttle Body, Instruction Sheet
- Product Condition: New
- Product Line Marketing Stmt: After 50 years of leadership in the automotive aftermarket, we are excited to start the next chapter of CARDONE's dynamic history. We are positioned to support the next wave of vehicle technology and ready to innovate new solutions that bring value to our customers - all while upholding sustainable business practices and high ethical principles. We build it better.
- Throttle Body Type: Electric
- Throttle Body Actuation Type: Electric
- Throttle Body Finish: Finished
- Throttle Body Inlet Shape: Round
- Throttle Body Material: Aluminum, Steel, Plastic
- Throttle Body Outlet Shape: Round
- Throttle Position Sensor Included: Yes
- Venturi Quantity: 1
- Manufacturer:
- Cardone New
- Part Number:
- 6E-8016
- Manufacturer Part Number:
- 6E-8016
- Description:
- Fuel Injection Throttle Body
- Long Description:
- Fuel Injection Throttle Body
- Part Type:
- Fuel Injection Throttle Body
- Category:
- Air And Fuel Delivery
- Subcategory:
- Fuel Injection System And Related Components
- Sales Rank:
Product Details
- Core Price:
- ...
- Condition:
- New
- Product Fit:
- Direct Fit
- Weight:
- 2.6 lbs.
- Height:
- 5.375"
- Width:
- 6.062"
- Length:
- 6.062"
- UOM:
- EA
- Quantity Sold:
- Sold individually
- Qty Per Application:
- 1
- Minimum Order Qty:
- 1
- Item GTIN:
- 884548250529
- Item Location:
- Phoenix, AZ
Technical Details
- CTO
- CN
- Emission Code
- 1
- Canadian Harmonizing Tariff Code
- 8481800081
- Harmonized Tariff Code (Schedule B)
- 8481809020
- Harmonized Tariff Code (HTS)
- 8481809020
- Life Cycle Status Code
- 2
- Life Cycle Status Description
- Available to Order
- SDR Required Flag
- N
- Maximum Cases per Pallet Layer
- 35
- Pallet Layer Maximum
- 7
- Remanufactured Part
- N
- Warranty Distance UOM
- MI
- Warranty Special
- Limited Lifetime
- Warranty Special UOM
- TX
- Warranty Time UOM
- MO
- Application Summary
- Toyota 4Runner 2010, Tacoma 2016-05
- AAIA Part Type Description
- Fuel Injection Throttle Body
- Product Description - Invoice
- New Fuel Injection Throttle Body
- Key Search Words
- Throttle Body, Throttle, Fuel Injection Throttle Body, Intake, Air Intake, Throttle Valve, Carburetor, Manifold, TBI, ETB, Electronic Throttle Body, Mechanical Throttle Body, Throttle Bore, Throttle Blade
- Label Description
- New Fuel Injection Throttle Body
- Marketing Description
- All CARDONE 100% New Electronic Throttle Bodies are guaranteed to fit and function like the original due to our proprietary engineering standards. Each unit is built and tested as a complete assembly to ensure quick installation and reliable performance. All components match O.E., ensuring accurate air flow in all driving conditions and peak engine performance.
- Short Product Description
- Throttle Body
- Bore Diameter
- 60 MM
- E-Waste
- Yes
- FAQs
- A relearn calibration procedure is necessary after installation of replacement throttle body.
- FAQs
- Are your new throttle bodies the same design as OE?
- FAQs
- Can I purchase a throttle body with a bigger bore to increase horsepower and improve my throttle response?
- FAQs
- Not all throttle bodies have this feature where the throttle valve is reversed from its normal movement by the controlling module to break up any ice formation between the throttle bore and valve. This feature is based on application.
- FAQs
- What else does the throttle body control other than idle air bypass and acceleration throughout driving range?
- FAQs
- What's an Electronic Throttle body?
- FAQs
- The most common failure in an Electronic Throttle Body is the integrated Throttle Position Sensor. The ETB is equipped with high and Low voltage reference Throttle Position Sensor for redundancy. Either one of these sensors could fail or possibly both.
- FAQs
- The throttle body is also utilized as part of the cruise control, traction control, stability control, and pre-crash systems, as well as other systems that require engine torque management.
- FAQs
- Do all throttle bodies have an ice breaker mode for extreme cold starts?
- FAQs
- Do you sell throttle body spacers?
- FAQs
- Is there anything that has to be done after installing the replacement throttle body?
- FAQs
- No, bypassing of coolant hoses is not recommended. There are cases where we sell units without coolant pipes, because we are following OE supersessions where the pipes have been removed and instructions are provided for rerouting coolant hoses.
- FAQs
- What causes the Electronic Throttle Body to fail?
- FAQs
- What happens when an Electronic Throttle Body fails?
- FAQs
- Is it ok to bypass the coolant hoses?
- FAQs
- Swapping your throttle body for one with a bigger bore is not recommended. The throttle bodies we sell are specific to the application.
- FAQs
- The OE throttle body has coolant hoses attached. What's the purpose?
- FAQs
- The purpose of the attached coolant hoses is to keep the throttle body warm by the transfer of heat from the coolant to the housing preventing moisture from freezing between the throttle body bore and throttle valve during extreme cold temperatures.
- FAQs
- We do not sell Throttle Body spacers nor do we recommend the use of a spacer.
- FAQs
- When installing the new Electronic Throttle Body there is no need to modify the vehicle for installation.
- FAQs
- Will I have to modify anything on the vehicle to install your new throttle body?
- FAQs
- When an Electronic Throttle Body fails, the controlling module will illuminate the MIL/SES/CEL, the module will then activate a fail-safe mode operation and gradually reduce the engine's speed back to an idle rpm.
- FAQs
- The electronic throttle body is a powertrain component that has a plate, motor, and integrated position sensors which are utilized to regulate the amount of air entering the engine by opening the throttle valve to a desired angle via commands from the vehicles Powertrain Control Module or Throttle Actuator Control Module.
- FAQs
- The new Electronic Throttle Body is designed and manufactured to meet OE Manufacturer standards.
- Housing Color/Finish
- Gray/Finished
- Housing Material
- Aluminum
- Idle Air Control Motor Included
- No
- Inlet Diameter (mm)
- 70
- Inlet Type
- Round
- Original Equipment Replacement
- Yes
- Outlet Diameter (mm)
- 61
- Outlet Type
- Round
- Package Contents
- Electronic Throttle Body, Instruction Sheet
- Product Condition
- New
- Product Line Marketing Stmt
- After 50 years of leadership in the automotive aftermarket, we are excited to start the next chapter of CARDONE's dynamic history. We are positioned to support the next wave of vehicle technology and ready to innovate new solutions that bring value to our customers - all while upholding sustainable business practices and high ethical principles. We build it better.
- Throttle Body Type
- Electric
- Throttle Body Actuation Type
- Electric
- Throttle Body Finish
- Finished
- Throttle Body Inlet Shape
- Round
- Throttle Body Material
- Aluminum, Steel, Plastic
- Throttle Body Outlet Shape
- Round
- Throttle Position Sensor Included
- Yes
- Venturi Quantity
- 1
Specifications
The CARDONE NEW Fuel Injection Throttle Body contains no remanufactured components, and is designed to operate in either city or highway driving.
| Year | Make | Model | Engine | Notes |
|---|---|---|---|---|
| 2016 | Toyota | Tacoma | 2.7L | [Fuel Injection Throttle Body] Quantity needed per vehicle: 1 |
| 2015 | Toyota | Tacoma | 2.7L | [Fuel Injection Throttle Body] Quantity needed per vehicle: 1 |
| 2014 | Toyota | Tacoma | 2.7L | [Fuel Injection Throttle Body] Quantity needed per vehicle: 1 |
| 2013 | Toyota | Tacoma | 2.7L | [Fuel Injection Throttle Body] Quantity needed per vehicle: 1 |
| 2012 | Toyota | Tacoma | 2.7L | [Fuel Injection Throttle Body] Quantity needed per vehicle: 1 |
| 2011 | Toyota | Tacoma | 2.7L | [Fuel Injection Throttle Body] Quantity needed per vehicle: 1 |
| 2010 | Toyota | 4Runner | 2.7L | [Fuel Injection Throttle Body] Quantity needed per vehicle: 1 |
| 2010 | Toyota | Tacoma | 2.7L | [Fuel Injection Throttle Body] Quantity needed per vehicle: 1 |
| 2009 | Toyota | Tacoma | 2.7L | [Fuel Injection Throttle Body] Quantity needed per vehicle: 1 |
| 2008 | Toyota | Tacoma | 2.7L | [Fuel Injection Throttle Body] Quantity needed per vehicle: 1 |
| 2007 | Toyota | Tacoma | 2.7L | [Fuel Injection Throttle Body] Quantity needed per vehicle: 1 |
| 2006 | Toyota | Tacoma | 2.7L | [Fuel Injection Throttle Body] Quantity needed per vehicle: 1 |
| 2005 | Toyota | Tacoma | 2.7L | [Fuel Injection Throttle Body] Quantity needed per vehicle: 1 |
Warranty Information
New products purchased from our store are covered by a manufacturer warranty. Other than applicable manufacturer warranties, or as otherwise provided in these Terms & Conditions, there are no warranties, express or implied for any of our products, and we specifically disclaim any warranty of merchantability or fitness for a particular purpose for tires, aftermarket wheels, and tire & aftermarket wheel packages.
For other parts, we provide a limited warranty of 90 days from the date received by the original purchaser or installer, unless otherwise specified, which covers the replacement of a defective part(s). The warranty applies only to parts replacement with same or better quality. For such cases, a full refund will be issued to the original purchaser. A refund or an exchange of a defective part will be processed only if it is accompanied by the original sales invoice. All items must be in their original condition and must not be damaged due to incorrect installation upon return. The warranty is limited only to the original purchaser and is non-transferable.
All items are given a limited 90-days warranty period by the manufacturer. The manufacturer will allow the parts to be covered by their warranty provided that the part was not modified by the buyer.
Under NO circumstances will our liability exceed the amount of the original sale.
Products damaged as a result of abuse, misuse, improper repairs or maintenance, improper installation, alteration, or modification will not be covered by the warranty.
The warranty does not cover airfreight charges, labor expenses, towing expenses, or rental car expenses resulting from installation errors. Return shipping is the responsibility of the buyer. We will not reimburse any return shipping charges incurred.
All returned items must have the RA (Return Authorization) number written outside the shipping box prior to return. The RA Numbers can be obtained by creating a return from within your account. Returned items without RA numbers will not be accepted.
Our liability does not cover lost or stolen packages mailed back by the customer containing the parts being claimed under warranty. Because the customer is the shipper, he/she is the only one who can file any lost claim with the shipping company. Therefore, the claim must be coordinated and processed through the shipping company by the customer.